Gas Safe Register carries out inspections to assess the competence of registered gas engineers and monitor compliance with gas safety requirements. Although many engineers are familiar with traditional site inspections, the Register also uses Virtual Inspection Events (VIEs) as part of its inspection programme.
A Virtual Inspection Event allows engineers to complete an online technical knowledge assessment without arranging a visit to a customer’s property. The assessment focuses on gas safety knowledge, particularly the Gas Industry Unsafe Situations Procedure (IGEM/G11), and is hosted by a specially trained team of advisors and technical officers.
For engineers receiving their first VIE invitation, the process may be unfamiliar. Understanding the nomination procedure, completing the required preparation and knowing the technical subjects involved can help make the experience more straightforward.
Gas Safe Virtual Inspection Events
Virtual Inspection Events are online inspection activities used by Gas Safe Register to assess engineers’ knowledge of gas safety requirements.
They incorporate preparatory training and a technical assessment based on the Gas Industry Unsafe Situations Procedure, IGEM/G11.
Unlike an inspection conducted at a property, a VIE does not involve an inspector observing an engineer installing, servicing or repairing a gas appliance. Instead, it assesses their ability to recognise unsafe situations and apply the appropriate procedures.
The Register uses several approaches to inspection, including:
- On site inspections involving gas work carried out by a registered engineer.
- Inspection events held at designated venues.
- Virtual Inspection Events conducted online.
- Remote technical assessments, where appropriate.
These approaches serve different purposes within the inspection programme. Gas Safe Register’s published registration policy describes virtual and face to face inspection events as additional inspection methods rather than replacements for inspections selected through its risk model.
Virtual Inspection Events have received HSE approval and form part of the Register’s wider inspection arrangements.
Virtual Inspections and IGEM/G11
The technical assessment concentrates on the Gas Industry Unsafe Situations Procedure, commonly referred to as IGEM/G11.
This procedure provides a structured approach to identifying and responding to unsafe gas installations and appliances.
Engineers must understand the classifications used within the procedure, the circumstances in which they apply and the actions required to protect occupants and others who may be affected.
The principal unsafe situation classifications include:
| Classification | General Meaning | Required Understanding |
|---|---|---|
| Immediately Dangerous (ID) | An installation or appliance presenting an immediate danger to life or property if operated or left connected to the gas supply. | Recognising immediate danger and applying the required isolation, warning and reporting procedures. |
| At Risk (AR) | An installation or appliance with a recognised fault that could become dangerous if used or left in operation. | Identifying the relevant defect and applying the prescribed safety actions. |
| Not to Current Standards (NCS) | An installation that does not meet current standards but does not necessarily constitute an unsafe situation. | Distinguishing a standards issue from a condition requiring unsafe situation procedures. |
The classification must be determined using the current IGEM/G11 procedure and the actual circumstances. Not every installation that fails to meet a current standard should automatically be classified as unsafe.
This is particularly important because an incorrect classification can lead to unnecessary isolation of an appliance or, more seriously, a dangerous installation being left in use.
Engineers preparing for a VIE should be familiar with the practical application of unsafe situations procedures and gas engineer legal duties, rather than relying solely on memorised definitions.
Receiving a Virtual Inspection Nomination
The process begins when a registered business receives a Virtual Inspection Event nomination request from Gas Safe Register.
The request will identify the deadline for nominating an engineer. This is an important distinction because the nomination deadline is not the date by which the actual inspection must be completed.
The business must nominate an engineer by the specified deadline. The engineer then follows the separate process for accessing the training and arranging the assessment.
Nominating an Engineer
The business should complete the following steps:
- Log in to the Gas Safe Register online account.
- Locate the yellow Virtual Inspection alert.
- Select the nomination link.
- Enter the nominated engineer’s current email address.
- Submit the nomination details before the deadline.
Once the information has been submitted, the business has completed its part of the nomination process.
The nominated engineer will then receive an email containing instructions for accessing the online platform.
Businesses should ensure that the email address provided is correct and that the nominated engineer is aware of the invitation.
Booking a Virtual Inspection Event
Following nomination, the engineer receives an email from no_reply@tessello.co.uk.
The email provides instructions for accessing the assessment platform, completing the required pre-learning, and booking an available event.
The engineer should follow the invitation promptly, even if they intend to book the inspection for a later date.
The process generally involves:
- Opening the invitation email and following the supplied link.
- Accessing or setting up the relevant online account.
- Completing the required preparatory learning.
- Choosing an available inspection appointment.
- Following the instructions provided for attending the event.
If the invitation does not appear in the inbox, the engineer should check their junk or spam folder.
The email may also contain additional guidance and frequently asked questions covering the specific arrangements for the event.
Preparing for the Technical Assessment
The preparatory learning is designed to help engineers review the technical knowledge needed for the assessment.
Because the assessment focuses on IGEM/G11, preparation should concentrate on applying unsafe situations procedures correctly.
Engineers should be comfortable identifying the difference between an Immediately Dangerous installation, an At Risk installation and a situation that is Not to Current Standards.
They should also understand the responsibilities involved in warning customers, recording findings and taking the appropriate action where an unsafe situation is identified.
Relevant areas for revision include:
- Identifying unsafe gas appliances and installations.
- Applying ID and AR classifications correctly.
- Recognising installations that are not to Current Standards.
- Gas isolation and disconnection requirements.
- Customer notification and warning notices.
- Recording defects and communicating safety advice.
- Relevant technical guidance and manufacturer requirements.
Knowledge of the Gas Safety (Installation and Use) Regulations is also important, particularly the duties relating to competence, safe working practices and the condition of gas appliances and installations.
Engineers should review the current technical guidance rather than relying entirely on procedures remembered from previous ACS assessments.
Technical Assessment Format
A Virtual Inspection Event includes an online knowledge assessment conducted under controlled conditions.
The nominated engineer must follow the instructions provided by the host and complete the assessment using the designated online platform.
The assessment is intended to establish whether the engineer can apply relevant gas safety knowledge to the situations presented.
Questions may involve identifying defects, determining unsafe situation classifications or selecting appropriate actions in response to an installation fault.
The precise number of questions, assessment duration and permitted reference materials should be confirmed from the current VIE invitation and instructions.
Engineers should not assume that arrangements described for a traditional site inspection, including the use of reference materials, automatically apply to the online assessment.
Technical Equipment and Internet Requirements
The assessment must be completed using suitable equipment in an environment that allows the engineer to concentrate without interruption.
A reliable internet connection is essential because the event takes place online and involves interaction with the host.
Gas Safe Register recommends using a laptop, PC or Mac with a working webcam and microphone.
Although some tablets and mobile devices may be suitable, compatibility can vary. Older operating systems may also create technical difficulties.
| Requirement | Preparation |
|---|---|
| Computer | Use a suitable laptop, PC or Mac wherever possible. |
| Webcam | Check that the camera works correctly before the appointment. |
| Microphone | Test the microphone and ensure the assessment platform has permission to use it. |
| Internet Connection | Choose a reliable connection capable of maintaining the online session. |
| Browser Settings | Disable pop-up blocking where required by the assessment instructions. |
| Environment | Use a quiet room where interruptions are unlikely. |
Engineers should check their equipment in advance rather than waiting until the event begins.
During the assessment, it is important to remain connected and follow the host’s instructions. Technical interruptions, loss of connectivity or failure to complete the process correctly may prevent the inspection from being completed and could result in rescheduling.
Mistakes During Virtual Inspections
Most avoidable difficulties fall into two categories: technical preparation and gaps in the application of gas safety procedures.
Leaving the Invitation Too Late
Failing to open the invitation promptly can delay access to the preparatory learning and reduce the choice of available appointment dates.
Businesses should complete the nomination by the deadline and encourage the nominated engineer to arrange the event without unnecessary delay.
Unreliable Equipment or Connectivity
An unstable internet connection, incompatible device or microphone problem can interrupt the assessment.
Testing the equipment and choosing a quiet location can reduce the likelihood of technical difficulties.
Confusing Unsafe Situation Classifications
One of the most important areas of technical preparation is distinguishing between ID, AR and NCS situations.
Engineers must base their decisions on the relevant criteria rather than assuming that every defect requires the same response.
For example, an installation that does not comply with a newer standard is not automatically Immediately Dangerous. Equally, an appliance that appears to operate normally may still present a significant safety risk.
Relying on Previous Experience Alone
Experienced engineers may be familiar with particular faults but less accustomed to explaining the formal procedure that applies.
The VIE assesses knowledge of recognised safety requirements, so engineers should revise the current guidance and terminology.
Technical Bulletins and updates to industry procedures are particularly important where requirements have changed since the engineer’s last assessment.
Virtual Inspection Versus On Site Inspection
Virtual and on-site inspections both contribute to the Gas Safe Register’s oversight of registered businesses, but they assess competence in different ways.
| Inspection Feature | Virtual Inspection Event | On Site Inspection |
|---|---|---|
| Location | Online from a suitable private environment. | At a property or location where gas work can be inspected. |
| Primary Focus | Technical knowledge, particularly unsafe situation procedures. | Practical gas work, technical knowledge and compliance with applicable requirements. |
| Practical Work | No physical appliance work is observed as part of the online knowledge assessment. | May include observation or examination of practical gas work. |
| Equipment | Computer, webcam, microphone and internet access. | Relevant tools, testing equipment, documentation and access to the installation. |
| Assessment Arrangements | Hosted online under the instructions provided for the event. | Conducted by an inspector according to the requirements of the inspection. |
Gas Safe Register may also use remote technical assessments and other inspection activities where appropriate.
The Register’s inspection arrangements are designed to monitor both technical knowledge and the quality of gas work being undertaken.
Unsuccessful Virtual Inspection Assessments
An unsuccessful assessment does not necessarily mean that an engineer will immediately lose their Gas Safe registration.
However, it may result in further inspection activity, additional assessment or other action determined by Gas Safe Register.
The specific outcome depends on the circumstances and the Register’s applicable inspection and registration procedures.
An engineer may be required to demonstrate their competence through a subsequent inspection or assessment.
The interview material supplied for this article describes instances where an in-person inspection followed an unsuccessful virtual assessment. This should be treated as an example of a possible outcome rather than a guaranteed second attempt.
Engineers should follow the instructions issued by Gas Safe Register if their assessment is unsuccessful and address any identified knowledge gaps.
Missed Appointments and Registration Responsibilities
Virtual Inspection Events form part of Gas Safe Register’s inspection activity under Section 4 of its Rules of Registration.
Registered businesses are expected to cooperate with the inspection process.
If a nominated engineer does not book or attend the event, this can delay completion of the inspection and may affect the business’s registration status until the outstanding requirements have been addressed.
The consequences depend on the circumstances and any action taken by the Register.
Gas Safe Register’s registration policy also identifies failure to permit inspection without a justified reason as a potential breach of its registration requirements.
Businesses should therefore treat VIE nominations and appointments as formal registration matters rather than optional training activities.
Where an engineer cannot attend, the business or engineer should contact the Register promptly to discuss the available arrangements.
Support for Virtual Inspection Events
Gas Safe Register assists with VIE nominations, booking arrangements and related enquiries.
If a business needs help with a nomination, the Scheduling Team can be contacted using the following details:
- Email: virtualinspectionevents@gassaferegister.co.uk
- Telephone: 0800 408 5577, option 4.
The business should quote its Gas Safe registration number when contacting the Register.
Engineers experiencing difficulty accessing the online platform should refer to the invitation instructions or contact the relevant support team.
Where an engineer has accessibility requirements or needs alternative inspection arrangements, these should be raised directly with Gas Safe Register.
Maintaining Technical Knowledge Between Inspections
A Virtual Inspection Event should not be the only occasion on which an engineer reviews gas safety procedures.
Regulations, industry standards, manufacturer guidance and technical bulletins can change over time. Keeping technical knowledge current is an important part of maintaining professional competence.
Gas engineers should regularly review:
- Gas Safe Register technical bulletins and safety notices.
- Updates to IGEM/G11 and other relevant industry standards.
- Changes to the Gas Safety (Installation and Use) Regulations and associated guidance.
- Manufacturer installation and servicing instructions.
- Relevant articles and technical information in Registered Gas Engineer magazine.
- Training and assessment requirements associated with their registered work categories.
The L56 Approved Code of Practice remains an important reference for engineers reviewing the legal framework surrounding gas work.
Engineers should also be aware of their responsibilities for gas safety compliance and enforcement, particularly where unsafe installations or breaches of statutory duties are identified.
Gas Training and ACS Assessment in Staffordshire
Virtual Inspection Events provide an opportunity for gas engineers to demonstrate their understanding of important safety procedures. Maintaining that knowledge requires ongoing professional development, practical experience and familiarity with current industry guidance.
At Staffordshire Training Services, we provide accredited gas training and ACS assessment for engineers entering the industry and experienced professionals maintaining or expanding their qualifications.
Our training centre in Stafford offers practical facilities and instruction delivered by qualified engineers and experienced tutors.
Engineers approaching the expiry of their existing qualifications can also prepare for ACS renewal and reassessment, helping them maintain the recognised competencies associated with their Gas Safe registration.
Although a Virtual Inspection Event is not an ACS assessment, both reinforce the importance of technical knowledge, safe working practices and professional competence.
Keeping up to date with unsafe situations procedures, technical guidance and relevant gas safety regulations helps engineers approach inspections with greater confidence and maintain the standards expected of registered professionals.
Technical note: VIE nomination, booking and assessment arrangements may change. Engineers should follow their current Gas Safe Register invitation and the latest official guidance. The interview observations provided are supplementary context and should not be treated as definitive Gas Safe Register policy.
Related Articles
- Working Within Scope for Gas Engineers
- Preparing for Your First ACS Gas Assessment
- Standards Of Workmanship and Industry Compliance For Gas Engineers
- Enforcement Penalties and Legal Consequences For Gas Engineers
- Gas Safety (Installation and Use) Regulation Failures Found During ACS
Prefer an AI Summary?


